PRODUCT SPECIFICATIONS
SKF Multilog On-line System IMx-8/IMx-8Plus
48 (63)
SKF Multilog On-line System IMx-8/IMx-8Plus
User Manual
Revision E
(typically, 0.01% up to 2.5 kHz)
•
Pulse counting
•
Configurable pulses per rev.
o
The product of pulses per rev and rotational speed is subject to the
maximum frequency range, limitation
3.2.8 Signal processing
•
Event capture mode
o
Data storage on time, associated measurement value or alarm state
o
Run cycle mode (repeated or cyclic captures)
•
Time waveform
•
Vector analysis with circular alarms
•
SKF enveloping filters I, II, III, IV
•
FFT: 100 to 6 400 lines
o
Integration/Differentiation in the frequency domain
o
Window function: Hanning
•
Customer formulated mathematical equations
•
Dynamic alarm levels, active range determined on multiple parameters
•
Data storage on time, event or alarm condition
•
Detection of sensor and cable fault
•
Watchdog and self-testing
3.2.9 Interfaces
•
The IMx-8 incorporates only an Ethernet, RJ45, interface. For the IMx-8Plus,
the mobile data and Ethernet interfaces are alternatives and cannot be used
concurrently
•
Mobile data (IMx-8Plus only)
o
LTE (4G) and legacy 2G/3G networks
▪
for details of the frequencies/standards supported
o
Auto switching between network types
o
Dedicated antenna connections provided
▪
LTE 1/2 SMA female
o
DNS lookup and NTP time synchronisation are supported
o
Firmware configurable support for micro-SIM or eSIM
▪
Micro-SIM card holder (top end cap)
•
Ethernet:
o
RJ45
▪
10/100 Mbit/s TCP/IP (one port)
▪
Auto MDI-X cable detection
▪
Support for PoE, refer
o
Wi-Fi (IMx-8Plus only)
▪
802.11n
▪
2.4 GHz band, channels 1 to 11
▪
Open or secured networks, WPA2-PSK
▪
Dedicated antenna connection provided: Wi-Fi SMA female
•
Refer also to
