1 - 2
QuickCollect CMDT 391 / CMDT 391-Ex
User Manual
–
Revision B
No Submersion/Immersion
The sensor is dust tight and has an IP rating consistent with resisting water spray from all
directions. If it is subjected to more extreme conditions, this may affect its operation.
Avoiding Damage and Injury
To avoid damage to the sensor or injury caused by the sensor falling, always place it on a
solid stable surface when not in use and do not place any heavy objects on it.
Use a damp, clean cloth for general cleaning. Unless explicitly stated otherwise do not
use cleaning fluids, abrasives or aerosols as these might cause damage, fire or electrical
shock.
Specific Conditions of Use
The Ex approved version of the QuickCollect sensor, CMDT 391-Ex, must be used in
accordance with the safety instructions provided with that device.
Agency approvals for the CMDT 391-Ex with CMAC 8010-Ex cable:
Ex ib IIC T4 Gb
–
20 °C
≤
Ta
≤
+60 °C
Ex ib IIC T4 Gb
– °C ≤ Ta ≤
+60 °C
Class I, Zone 1, AEx ib IIC T4 Gb
– °C ≤ Ta ≤ + °C
IS Class I, Div. 2, Group A, B, C, D, T4
About This Manual
This manual provides information on the setup and use of the SKF QuickCollect Sensor
Bluetooth
® instruments (part no. CMDT 391 and CMDT 391-Ex) and the SKF QuickCollect
app. In this manual, the sensor instrument is commonly referred to as the QuickCollect
sensor, or just the sensor and the companion app as SKF QuickCollect app or just the
app.
The features and functions are described from the perspective of a CMDT 391 but apply
equally to the CMDT 391-Ex provided that the safety instructions are followed.
