CARE/MAINTENANCE
12-9
When Not In Use
Sunlight and dust can be your boat’s worst enemies. Keep your boat covered when not in use. A boat cover
(option available from your Skeeter Dealer), preferably light in color, is a wise investment to help prevent damage
while the boat is stored or on the road. DO NOT use sheet plastic or other non-porous materials, which can trap
moisture between the cover and the boat’s surface.
Each Month
Wash the boat’s surface with a mild soap to remove normal accumulation of soil and stain. Avoid any kind of
alkaline cleansers such as tri-sodium phosphate (TSP), abrasives, bleaches or ammonia. DO NOT use acids or
other strong chemicals to clean the boat. For best results, use cleaners recommended for fiberglass and follow
the instructions on the label.
Twice Yearly (Minimum)
Wax your boat’s gelcoat surface to help prevent loss of gloss and protect the finish. Use only wax recommended
for use on fiberglass and follow the instructions carefully. Apply only a thick coat of wax to a small area (3 feet by
3 feet) at a time using clean applicator cloths. If you are using a power buffer, never use one that turns faster
than 4000 RPM. High heat may build up and cause damage to the finish. NEVER wax a gelcoat surface that has
been sitting in the sun and is hot. Never wax a gelcoat surface in direct sunlight.
Section 12_horiz 11/3/03 2:46 PM Page 12-9
