8
Figure 5. AC Cable Connect to unit
Step 1: Disconnect the unit from the battery by removing the battery cables. Turning off the unit before
disconnect from the battery.
Step 2: Following the wiring guide located in the AC input wiring compartment as figure 5, connect the GND
(green/yellow), Line (brown), and neutral (blue) wires from the AC input (utility, generator, etc) to
the terminal block.
Caution!!
Be sure that AC source is disconnected before attempting to hardwire it to the unit.
Step 3: Connect the AC Line output wiring to the terminal marked AC Line (output), following the wiring
guide inside the compartment. Torque the wires into the terminal block.
Step 4: Lock the AC covers.
