6
SAMPLE PUMP OPERATION
The user may choose to:
• Operate the pump manually in the
fi
eld (on/o
ff
)
• Program a schedule into the pump manually
• Program the pump for multiple schedules from a PC
with optional DataTrac
®
for Leland Legacy Software (
see
Ordering Information, Accessories
).
See the Leland Legacy Quick Guide to operate the SKC
Leland Legacy Sample Pump.
For advanced programming, see
the complete Leland Legacy Pump Operating Instructions.
Charging the Battery
Completely charge a new ba
tt
ery pack using the SKC-approved charger (Cat. No.
223-241) before operating the pump. It may be necessary to charge the ba
tt
ery a
few times before maximum ba
tt
ery capacity is achieved.
Cautions:
• Do not charge or operate pump with or without charger in hazardous
locations.
• Use only the SKC-approved charger for this pump. Use of an
unapproved charger may damage the ba
tt
ery and pump and VOIDS
ANY WARRANTY.
• Do not open, disassemble, short circuit, crush, incinerate, or expose the
ba
tt
ery to
fi
re or temperatures in excess of 212 F (100 C).
• Tampering with the ba
tt
ery pack VOIDS ANY WARRANTY.
• Ensure proper orientation of charging cable before plugging it into the
charging jack. Improper orientation/contact will short-circuit the ba
tt
ery
and VOIDS ANY WARRANTY.
• Short-circuiting the ba
tt
ery pack will render it immediately inoperative.
• Failure to follow warnings and cautions VOIDS ANY WARRANTY.
The ba
tt
ery pack may be kept on the SKC-approved charger for an
inde
fi
nite time.
1. Insert the plug from the charging unit into the
charging port on the ba
tt
ery adapter (on top of the
external ba
tt
ery assembly).
2. Insert plug from power supply into the jack on the
charging unit.
3. Install the appropriate wall plug on the power
supply and plug power supply into a wall outlet.
The ba
tt
ery will recharge in approximately 15
hours. For a complete charge, do not run the pump
connected to the external ba
tt
ery assembly during
charging. After charging is complete, disconnect
ba
tt
ery from charger and connect pump to ba
tt
ery.
See Ba
tt
ery Setup
.
1
External
battery
assembly
Battery
adapter
Charging
unit plug
Power
supply
Charging
unit
External
battery
assembly
