manualshive.com logo in svg

SKC 901-4011, Operating Instructions Manual

Share
Download
SKC 901-4011 Operating Instructions Manual Download Page 22

Page 20 

007-01-014 Issue A 

www.skcltd.com

Press 

 to display the next review screen, which is the 

‘Previous Run’ screen.
This will be the ‘Previous Run’ time - the elapsed runtime 

the previous pump sample run. If there is no previous time 

recorded in the pump memory this will display ‘000:00:00’.

 

Æ

 

  Previous Run
   006:00:00

Press 

 to display the next review screen, which is the 

‘Timed Run Set’ Screen. This screen is only displayed if a 

sample run time has been programmed.
The screen indicates the length of the sample run time set 

in hours and minutes.

 

Æ

 

 Timed Run Set
     001:00

Press 

 to display the next review screen, which is the 

‘Repeats Set’ screen. This screen is only displayed if a 

number of sample repeats have been programmed.
The screen indicates the number of repeats and the delay 

time between each repeat run in hours and minutes.

 

Æ

 

Repeats Set   06
Rept Dly  001:00

Press   to return to the ‘SELECT’ main menu screen.

 

Æ

 

  SELECT   Sleep
Run Setup Review

Programming the Flite4 Pump

Summary of Contents for 901-4011









































Reviews:

No comments

Brands by name

Popular brands

Load more brands