SKC 224-44MTX, Operating Instructions Manual

Page: 29 / 40

www.skcltd.com 224-UMTXM Issue K Page 27
Universal MTX Pump Replacement Parts
Item Part No. Description Item Part No. Description
1
P22433C
Keypad cover plate 8
P22417G
Pump body
2
P22433RGY
Cap screws (set of 2) 9
P22409
Inlet filter & O ring kit
(3 filters & 3 O rings)
3
P22433ES
External screw pack 9
P2240901
Inlet filter (pack of 10)
4 P22419MTX Battery pack 4.8V 2.0Ah NiMH 10 P22417D
Filter housing assembly
(includes 1 inlet filter & 1 O ring)
5
P22433L
Flow meter assembly 11
P22417K
Pulsation dampener (set of 2)
6
P22417F
Valve plate assembly (set of 2) 12
P22417J
Regulator assembly
7
P22417H
Yoke / diaphragm assembly 13
P22417C
Pressure (exhaust) port fitting
SKC recommend that our air sampling pumps are regularly serviced by one of our Authorised Service Centres.
Due to the safety implications associated with the incorrect repair of ATEX certified intrinsically safe products
for use in potentially explosive atmospheres, it is our policy to only supply the complete range of replacement
parts to our Authorised Service Centres who are trained in the service and repair of these products.
Care must be taken when dis-assembling and re-assembling the pump to replace the above listed internal parts
to ensure that no components are damaged or incorrectly assembled as this could affect pump performance
and/or invalidate the ATEX certification of the pump. Do not apply excessive force when tightening the screws.
If in any doubt contact your local distributor or SKC on +44 (0) 1258 480188.
The range of replacement parts listed above is available to all customers. If the required part is not listed,
contact SKC on +44 (0) 1258 480188.
Note: Table item numbers correspond to the ringed numbers shown in the figures on page 26 of this manual.