manualshive.com logo in svg

SKB Primo 27 AD, Instruction Manual, Page: 3 / 12

Share
Download
SKB Primo 27 AD Instruction Manual Download Page 3

 

Sicherheitskonzepte Breuer GmbH 

Broekhuysener Straße 40, 47638 Straelen, Tel.: +49 2834 943 01 00, Fax: +49 2834 943 05 62 

[email protected], www.sicherheitskonzepte-breuer.com   

 

 

 

 

 

 

3

 

This  instruction  manual  is  supplied  with  every  Primo  anchor  device.  It  must  be  read  before  use  and  stored  in  close  proximity  to  the 
equipment at all times.  
The assembly of the anchor device is described in a separate manual. 
 

Caution:

 Only original parts may be used! 

Please check the roof construction before assembly, i.e., always check whether the surface is suitable for attaching the anchor device.  If in 
doubt, contact a structural engineer. 
The Primo anchor device may only be used with safety harnesses in accordance with DIN EN 361, energy absorbers in accordance with DIN 
EN 355 and lanyards in accordance with DIN EN 354 for fall protection, according to the instruction manual of the respective manufacturer. 
The lanyard should be equipped with a length adjustment in accordance with DIN EN 354. The opening of the carabiner hook must exceed 
16 mm. 
It is essential for safety that following a fall or when damage (cracks or breakages) are found, the product is only used again after obtaining 
the written consent of an expert.  
 
The information in the corresponding instruction manual must be observed.  

 
Load capacity 

 

max. three persons per anchor point (Primo) 

 

Before each use of the Primo  

A visual and functional inspection must be conducted for the following points: 
 

 

Corrosion 

 

Deformation 

 

Damage (e.g. distortion or cracks) 

 

Label (nameplate) present 

 

Wobble test (perform manually at the anchor point) 

 

Ring bolt secure (screwed all the way in, firm position of the ring bolt)   

 

Check legibility 

 

Application: 

 

Before entering areas where there is a risk of falling (e.g. walking on the flat roof): 

Always check whether the components of the personal protective equipment against falling from a height are in order and whether they 
comply with that specified in this instruction manual and/or on the inspection card. 
System components must be checked for completeness and correctness.  
 
The other personal protective equipment against falling from a height must be checked for external signs of damage and for completeness 
before use, in accordance with the associated instruction manuals. 
 

After entering areas where there is a risk of falling (e.g. walking on the flat roof):

  

The Primo anchor device can be used as a single anchor point, i.e., the person to be protected hooks the carabiner hook of his/her personal 
protective equipment against falling from a height directly into the eyelet of the anchor point. In this case, no more than 3 persons may be 
secured per eyelet.  
 

Caution:

 Unlocked carabiner hooks can inadvertently release from the anchor point! 

 

 

Summary of Contents for Primo 27 AD













Reviews:

No comments