2
·
Before cleaning the kettle disconnect from the power supply and wait until it was cooled down.
·
Only use the cord supplied with this kettle. If a replacement is required, only approved components
may be used.
·
The outside surface of the kettle may get hot during use, please take care when using the kettle.
·
Never fill in water more than the maximum acceptable water level.
·
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or
similarly qualified persons in order to avoid a hazard.
·
If the kettle is overfilled, boiling water may be ejected.
·
Keep electrical appliance out of reach from Children or infirm persons.Do not let them use
the appliance without supervision.
·
This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance by a person responsible for
their safety.
·
Children should be supervised to ensure that they do not play with the appliance.
·
This appliance is intended to be used in household only.
Before first use
Before first use, it is recommended to operate the kettle for 2 or 3 times following the instructions
above, this will remove any dust or residues remaining from the manufacturing process.
·
Take up the jug kettle from the base before filling.
·
To fill the jug kettle, open the cover by pulling the lid inwards, then fill to the desired level (min 0.
5L-Max.1.0L), close the lid by pressing it down until it clicks into place.
·
Plug the power supply cord into the main, press the On/Off switch downwards , the power
indicator lights up.
·
When the water has boiled the kettle will automatically switch itself off, you can stop the boiling
process at any time by lifting the On/Off switch. The power indicator will go out.
Note:
Do not open the lid when steam is coming out of the spout.
Kettle is only to be used with the stand provided.
