Refer to operation
guide for start up.
Remove Xpert Alert
®
alarm cover. Insert alarm module into the USB
port. Mount alarm (indoor only) using keyhole on the back of the unit.
Panel Installation
Install the panel module securely in a 4X rated enclosure.
4X Installation
Securely mount 4X enclosure.
Refer to schematic for wiring panel module.
Replace cover and connect
USB power cable.
Refer to Xpert Alert
®
alarm
instructions for fl oat switch
installation, battery back up,
and operation.
Warning: only connect to dry contact closure.
a
b
Xpert Alert
®
RF Alarm
Operation Guide
Mount and wire the alarm according to the installation instructions.
***Maximum distance between modules should be 200ft.
Press pairing but-
ton for 1 second on the panel module to enter setup mode for fast signal
strength updates.
Reposition the indoor module until 1 or more signal LEDs are illuminated green.
Verify the alarm is functioning by triggering an alarm condition on the outdoor panel and verify the
indoor Xpert Alert® alarm is alarming. Alarm LED on Xpert Alert® RF and Xpert Alert® alarms
will illuminate amber in color when alarming and the audible alarm will sound. For Xpert Alert® WiFi
cation of alarm was received.
Verify at least 1 or more signal LEDs are illuminated green monthly , and repeat step 3 as you
are able.
Alarm LED
Pairing Button
Step 1: Installation
Step 2: Signal Strength Check
Step 3: Test Alarm
Monthly Testing
Signal Strength
DO NOT INSTALL PANEL MODULE IN TANK.
min.
3 ft.
min.
3 ft.
BLACK
Test alarm weekly to insure
proper operation.
1 2 3 4 5 6
7 8 9 10 11 12 13
14 15 16 17 18 19 20
21 22 23 24 25 26 27
28 29 30 31
WHITE
ORANGE
WHITE/RED
Dry Contact
L
N
120VAC
Max
200ft.
