Plug Power Cord into wall outlet.
1
Press Power button (front of Machine shown).
2
Pressing Power button
again will turn the
Machine OFF.
Leave 12" to 24" clear space behind your eclips Machine to allow full Cutting Mat movement.
Place your eclips Machine at least 12" from the edge of your table to prevent it from tipping
over and causing possible injury.
Front
12" - 24"
12" – 24"
12"
Peel back and remove plastic cover from
Cutting Mat.
Align material to be cut with top left edge
of Cutting Mat. Press evenly into place.
1
2
Open cover and extend tray. (The Cutting
Mat can also be loaded with the Machine
cover closed.)
Align top edge of Cutting Mat against rollers and
push Load button. The Machine will automatically
move the Cutting Mat to Start position.
1
2
Rollers
Load Button
Tray
PlacEMENT
Replace plastic cover on
cutting Mat when not in use.
set up
Place eclips Machine on clean, level, dry and sturdy surface.
ENVIRONMENT
DO NOT unplug USB cable from Handheld Remote control while Machine is
in use. This will cause data loss.
NOTICE
WaRNING: MOVING PaRTS Keep fingers, hair and clothing away.
When removing more intricate shapes
from Cutting Mat, an eclips Spatula is
recommended (sold separately).
3
Push the load button
again to remove cutting
Mat from Machine.
PlacING MaTERIal ON cUTTING MaT
STaRTING THE MacHINE
cUTTING MaT
lOaDING cUTTING MaT IN MacHINE
WORKSPacE
Meijer.com
