14
4.
Locate the 3 – 5/8” bolts, washers and nuts.
Place the bolt and washer together, then
insert through the head section and then
through the foot section of the bed. Add the
washer and Nylock nut to complete the bed
frame assembly. Secure tightly using 15/16”
wrench.
5.
Plug
both foot actuators and attendant control
into modular junction box and power cord, (if
applicable.)
6
. Attach the two sections
with a 3/16” Allen wrench.
Put the bolts in through the
two sections with the
washer between the two
sections. Then secure the
nuts tightly with the 9/16”
wrench.