VD32 Remote Controller User Manual v1.2
- 33 -
2020 SIYI Technology Copyright
WARNING
Before linking the transmitter to the receiver, please make sure your aircraft motors have no
power connected (E.S.C are off connection).
Reboot the receiver when linking steps are finished, and try to manipulate on the
transmitter to confirm if it works well.
3.4 Throttle Joystick Type
VD32 transmitter supports both “Thumb-slide” and “Self-centering” throttle joysticks.
Users decide which type to use according to their preference. Generally, if your
VD32 transmitter has been set up as “Thumb-slide” throttle joystick, then the throttle
type in “System Settings” should be “Thumb-slide” as well.
Thumb-slide Joystick
: While users are powering on the transmitter, it alerts with voice
broadcast if the throttle joystick is not in its bottom position, and disables RF transmitting
automatically (the transmitter status indicator is off). The transmitter will not enable RF
transmitting until throttle joystick was back to the bottom position.
Self-centering Joystick
: No alert, the transmitter works normally.
Steps
In “System Settings” menu, tap on “General Settings - Throttle – Thumb-slide / Self-
centering” to choose your favorite throttle type.
