SIYI MK15E User Manual Download

Page: 77 / 95

MK15E User Manual V1.1

6.4 Dual Video Stream Connection

After connecting the FPV Hub to MK15E Air Unit, dual video stream will work in

many ways.

6.4.1 Dual SIYI IP Cameras

The two SIYI IP Cameras coming with MK15E Agriculture Dual FPV Combo are

default to be Camera A and Camera B assigned with different IP addresses

“192.168.144.25” and “192.168.144.26”. So, after connecting both cameras to the

FPV Hub and open SIYI FPV app, you can see dual video stream when the correct

RTSP addresses are input in the IP address bars.

Mark

The SIYI IP Camera coming with MK15E Agriculture FPV Combo, MK15E Enterprise

FPV Combo, or sold alone is default to be Camera A, of which the IP address is

“192.168.144.25”. When you purchase another camera for dual video stream, please make

sure that you get Camera B.

Dual video stream does not work when the two streams use the same IP address.

6.4.2 Dual Third-Party IP Cameras

Make sure that the two IP cameras use different IP addresses and connect them to

Summary of Contents for MK15E




















































































Search results

Summary of Contents for MK15E

Reviews:

Related manuals for MK15E

Brands by name

Popular brands

SIYI MK15E, User Manual

Search results

Summary of Contents for MK15E

Reviews:

Related manuals for MK15E

Brands by name

Popular brands