SIYI MK15E User Manual Download

Page: 31 / 95

MK15E User Manual V1.1

1.7 Indicator Definition

The status indicators on MK15E transmitter and Air Unit use three different colors

and different blinking frequencies to indicate the system’s working or abnormal

status.

1.7.1 Transmitter Indicator

Solid Red: No communication between transmitter and Air Unit.

Fast Red Blinks: Transmitter is binding to Air Unit.

Slow Red Blinks: Firmware does not match.

Triple Red Blinks: Image transmission initialization failed.

Four Red Blinks: Transmitter requires calibration.

Red-Green-Red-Green-Red Blinks: Unexpected power off of MK15

Android system.

Slow Yellow Blinks: Transmitter power voltage abnormal.

Two Yellow Blinks: Transmitter Bluetooth is not identified.

Yellow-Red Blinks: Transmitter high-temperature alert, level one.

Yellow-Red-Red Blinks: Transmitter high-temperature alert, level two.

Yellow-Red Blinks: Transmitter high-temperature alert, level three.

Solid Green: Perfect communication, 100% data package received.

Green Blinks: Blinking speed indicates MK15 system’s signal strength. The faster it

blinks, the worse the signal is.

Summary of Contents for MK15E




















































































Search results

Summary of Contents for MK15E

Reviews:

Related manuals for MK15E

Brands by name

Popular brands

SIYI MK15E, User Manual

Search results

Summary of Contents for MK15E

Reviews:

Related manuals for MK15E

Brands by name

Popular brands