SIYI AK28 HD User Manual Download Page 5

Page: 5 / 62

AK28 HD/HD+ User Manual V1.1

1 READ TIPS

1.1 Icon Definition

Please pay more attention to content indicated with the following marks:

DANGER

Dangerous manipulation probably leads to human injuries.

WARNING

Warnings on manipulation possibly leads to human injuries.

CAUTION

Cautions on what manipulation may lead to property loss.

Prohibited Mandatory Mark

1.2 Flight Safety

AK28 HD/HD+ Enterprise Smart Controller is designed for professional application

in specific industries, users who approaches to the device should have at least the

basic ability to manipulate it. Any irregular or irresponsible manipulations of the

device may cause damages or lead to property loss or human injuries. Non-adult

users must follow their trainer’s guidance or the supervision of an adult.

Disassembling or modification on AK28 HD/HD+ system is prohibited without

permission from its manufacturer, SIYI Technology.

Summary of Contents for AK28 HD
























































Search results

Summary of Contents for AK28 HD

Reviews:

Related manuals for AK28 HD

Brands by name

Popular brands

SIYI AK28 HD, User Manual

Search results

Summary of Contents for AK28 HD

Reviews:

Related manuals for AK28 HD

Brands by name

Popular brands