40
(11) Blade
(12) Cover
(14) Hexagon socket
(15) HEX key
(16) Manual
1.
The ratio of the mixture of unleaded gasoline 95 and
two-cycle oil.
2.
Note the risk o kickback.
3.
The maximum permissible speed of the cutting blade.
4.
The maximum permissible speed of the cutting head.
Maintenance:
1.
In order to maintain the product in proper working condition, perform the maintenance and
checking operations described in the manual in regular intervals.
2.
Always be sure to turn off the engine and disconnect the spark plug wire before performing any
maintenance or checking procedures. Warning! The metal components reach high temperatures
immediately after stopping the engine.
3.
In the event that any part must be replaced or any maintenance carried out which is not described
in this manual, it can not be performed.
4.
Under no circumstances you should never take the machine apart. Doing so might result in
damaging the product and faulty operation.
Handling fuel:
1.
The engine is designed to run on a mixed fuel which contains highly flammable gasoline. Never
store cans with fuel or refill the tank of the machine in any flammable environment.
2.
Never smoke while operating the machine or refilling its fuel tank.
3.
When refilling the tank, always turn off the engine and allow it to cool down.
4.
Wipe spilled fuel completely using a dry rag, if any fuel spillage occurs during refilling.
5.
After refueling, screw the fuel cap back tightly onto the fuel tank and then carry the machine at
least 3 m away from the place of refueling before starting the engine.
Transport:
When hand-carrying the machine, cover the cutting elements if necessary. Never transport the machine over
long distances in the vehicle without removing the fuel tank. Failure to do so may result in fuel leaking from
the tank during transport.
Assembly:
(1) Unit
(5) Cutting attachment guard
(6) Guard skirt
(9) Trimmer head
