ASSEMBLY, USE AND MAINTENANCE
16
LUBRIFICATION
The mower are delivered already
lubricated.
Grease all parts at least every 8 working
hours, especially the central (Rif. M). In
order to avoid excessive wear it is
indispensable to wash the bar with water at
the end of any mowing.
DRIVELINE
Grease Fitting are located on the Cross Assembly of each U Joint and on the Telescoping Tubes.
Do not force grease through the Needle Cup Assemblies.
Use quality grease to lubricate each part after the number of hours shown in the chart. Consult
the shaft operation and maintenance manual.
Summary of Contents for SB150
