ASSEMBLY, USE AND MAINTENANCE
15
HYDRAULIC SYSTEM
(OPTIONAL)
All the mowers can be provided with an hydraulic lifting device.
This accessory could only be
purchased by direct request.
It use exclusively to lift the cutter-bar in a
vertical position for
transporting.
Operate by means of a single acting
cylinder.
ASSEMBLY
Insert the support in the arm and fix it through the two
bolts M12 "A". Than secure the cylinder end point with
the apposite piston pin "F".
Assemble the second support with unit through the two
bolts M12 "A" to insert the piston rod in the pin and to
secure it through the apposite pin.
Connect the flexible tube end-point to the cylinder "B"
and connect the other end-point the hydraulic device of
the tractor.
USE
1) To stop the power take-off of the tractor.
2) To lift the mower through the lifting device of the tractor.
3) To operate the cylinder for the total lifting of the bar.
Summary of Contents for SB150
