SiT9514x GUI-UM Rev 1.04
Page 10 of 95
GUI User Manual
Clock Generators, Jitter Cleaners, and Network Synchronizers
4
Starting the GUI
The Cascade GUI provides an easy interface to configure the selected device. Since the GUI uses the FTDI
chip for the USB-to-serial I2C communication on the SiTime evaluation board, the FTDI chip related
software drivers are also installed by the installation file.
When the Cascade GUI application is launched, the
Choose Variant
selection menu appears to prompt
for selection of one of the product variants. Select the
SiT9514
x
variant you are using and click
Select
.
It is possible to start and use multiple instances of the application simultaneously.
NOTE:
Contact
to configure the SiT95143 device.
An example selection of the SiT95141 product variant is shown in
Figure 11: Option for SiT95141
The GUI software will launch for the selected SiT95141 device variant, see
Figure 12: GUI view for SiT9514
Users can move between the individual sections, configuring parameters, while related parameters in
the other sections remain visible. Programmed configurations can be saved in configuration profile files
containing the configuration parameters, or in sets of I2C/SPI read and write scripts for reuse, etc.