GS361A-H04 User Manual V1.06
3 / 20
4
Installation Instruction
4.1 Put in battery
1) Turn the
outer case
towards the
arrow with right hand and pull out.
2)
Refer to the polarity direction of
the battery compartment, put in 2 AA
alkaline batteries.
Note that cannot use rechargeable
batteries.
3)
After putting into the batteries, the
current temperature and symbol will
be displayed.
4)
Load the outer case and turn it
towards the opposite direction with
right hand to complete the installation
of batteries.
4.2 Start to use
You can use your thermostat in only a few steps.
1)
Press the knob and hold on for 3
seconds before the product be
installed on the valve.
2)
Until the
appears and the
symbol flickers, there will be slight
vibration at the same time.
