Sitecom WLM-6600, User Manual

Page: 34 / 61

You may need to define routes if your home setup includes two or more networks or
subnets, if you connect to two or more ISP services, or if you connect to a remote
corporate LAN.
Click ‘Add route’ to add a self-defined route.
Destination IP : The destination can be specified as the IP address of a subnet or a
specific host in the subnet. It can also be specified as all zeros to indicate that this route
should be used for all destinations for which no other route is defined (this is the route
that creates the default gateway).
Subnet Mask : The network mask of the destination subnet. The default gateway uses a
mask of 0.0.0.0.
Gateway Adress : The Gateway IP that should be used enter an address or select a pvc
channel
Metric : Defines the number of hops between network nodes that data packets travel.
The default value is 0, which means that the subnet is directly one hop away on the local
LAN network.
When you finish, click ‘Save’ to save the settings and restart the router so the settings
will take effect after it reboots.