IP Filter Set Editing
•
•
•
IP filter Set Index:
This is item number
Interface:
Select which channel (PVC) to configure.
Direction:
Select the access to the Internet (
“Outgoing”
) or from the Internet
(
“Incoming”
).or
Both.
IP Filter Rule Editing
•
•
•
•
•
IP Filter Rule Index:
This is item number
Active:
Select
Yes
from the drop down list box to enable IP filter rule.
Source IP Address:
The source IP address or range of packets to be monitored.
Subnet Mask:
It is the destination IP addresses based on above destination
subnet IP
Source Port Number:
This Port or Port Ranges defines the port allowed to be
used by the Remote/WAN to connect to the application. Default is set from range
0 ~ 65535.
It is recommended that this option be configured by an advanced
user.
