Chapter 2 - Default Settings
Below, the default settings for your router are shown.
•
Web Interface:
Username: admin
Password: admin
•
LAN Device IP Settings:
IP Address: 192.168.0.1
Subnet Mask: 255.255.255.0
•
ISP setting in WAN site:
1483 Bridged IP LLC
VPI/VCI: 0/34
•
DHCP server:
DHCP server is enabled.
Start IP Address: 192.168.0.100
IP pool counts: 100
2.1 Username and Password
The default username and password are “
admin
” and “
admin
” respectively.
Attention
Attention
If you ever forget the password to log in, you may press the RESET button
up to 6 seconds to restore the factory default settings.
2.2 Information from your ISP
Before configuring this device, you have to check with your ISP (Internet Service
Provider) what kind of service is provided such as PPPoE, PPPoA, RFC1483, or IPoA.
Gather the information as illustrated in the following table and keep it for reference.
PPPoE
VPI/VCI, VC-based/LLC-based multiplexing, Username,
Password (and Service Name).
PPPoA
VPI/VCI, VC-based/LLC-based multiplexing, Username, and
Password.
RFC1483 Bridged
VPI/VCI, VC-based/LLC-based multiplexing to use Bridged
Mode.
RFC1483 Routed
VPI/VCI, VC-based/LLC-based multiplexing, IP address, Subnet
mask, Gateway address, and Domain Name System (DNS) IP
address (it is fixed IP address).
