79
A2:
The default router setting might be a possible
reason. Need to double check if the configuration of the
default router settings is required.
Q:
Why does a series of broad vertical white line
appears through out the image?
A:
A likely issue is that the CMOS sensor becomes
overloaded when the light source is too bright such as
direct exposure to sunlight or halogen light. You need to
reposition the Internet Camera into a more shaded area
immediately as this will damage the CMOS sensor.
Q:
There is bad focus on the Internet Camera, what
should be done?
A1:
The focus might not be correctly adjusted for the
line of sight. You need to adjust the Internet Camera
focus manually as described in Adjust Internet Camera
Focus.
A2:
There is no adaptor fitted with your C-type lens. If
you have previously changed the supplied CS-type lens,
you may have unintentionally installed a C-type lens
without fitting the adaptor first.
Q:
Noisy images occur how can I solve the problem?
A1:
The video images might be noisy if the Internet
Camera is used is a very low light environment. To solve
this issue you need more lighting.
Summary of Contents for LN-402
