Sitecom Greyhound AC2600 Page 75 User Manual Download

Page: 75 / 100

Toolbox Settings

Toolbox – DDNS

DDNS allows you to map the static domain name to a dynamic IP address. You must get an
account, password and your static domain name from the DDNS service providers. This router
supports DynDNS, no-ip and other common DDNS service providers.



Enable/Disable: Enable or disable the DDNS function of this router.



Service: Select a DDNS service provider.



Hostname: Fill in your static domain name that uses DDNS.



Username: The account that your DDNS service provider assigned to you.



Password: The password you set for the DDNS service account above.

Click Save & Apply at the bottom of the screen to save the above configuration.

Summary of Contents for Greyhound AC2600





































































































Search results

Summary of Contents for Greyhound AC2600

Reviews:

Related manuals for Greyhound AC2600

Brands by name

Popular brands

Sitecom Greyhound AC2600, User Manual

Search results

Summary of Contents for Greyhound AC2600

Reviews:

Related manuals for Greyhound AC2600

Brands by name

Popular brands