Sitecom Greyhound AC2600 Page 2 User Manual Download

Page: 2 / 100

Table of Contents

Introduction

............................................................................................................ 3

Technical Specifications

.............................................................................................. 4

Package Contents

..................................................................................................... 6

Cautions

................................................................................................................ 7

Product Layout

......................................................................................................... 8

Setup your Router

....................................................................................................12

Setup your Computer

................................................................................................13

.................................................................................................16

Configure your Internet connection

...............................................................................17

Configure your Router – Basic Mode

...............................................................................20

Configure your Router – Advanced Mode

.........................................................................29

Wi-Fi Settings

................................................................................................................................... 30

StreamBoost

..................................................................................................................................... 47

File System Settings

......................................................................................................................... 52

App Settings

..................................................................................................................................... 57

Firewall Settings

............................................................................................................................... 58

Task manager

................................................................................................................................... 65

Administration

................................................................................................................................. 70

Toolbox Settings

.............................................................................................................................. 75

Addendum A: NetUSB

...............................................................................................79

Addendum B: Declaration of Conformity

..........................................................................90

Addendum C: GNU/GPL Information

...............................................................................92

Revision 1.0

Note: All the information contained in this manual was correct at the time of publication.

However, as our engineers are always updating and improving the product, your device’s
software may have a slightly different appearance or modified functionality than presented in
this manual.

Summary of Contents for Greyhound AC2600





































































































Search results

Summary of Contents for Greyhound AC2600

Reviews:

Related manuals for Greyhound AC2600

Brands by name

Popular brands

Sitecom Greyhound AC2600, User Manual

Search results

Summary of Contents for Greyhound AC2600

Reviews:

Related manuals for Greyhound AC2600

Brands by name

Popular brands