13
After switching the device on the LED bar on the top side of the transfer tray lights up blue once, then
one LED of the LED bar lights up green once. After approx. 15 seconds, the UV lamps are ready. The
eos® Transfer Tray P7810 is ready for operation.
Switch on the transfer tray by changing the position of the toggle switch from position 0 (off) to
position 1 (on).
Position 0 = Off
Three-pin power plug
Mini USB connection for
gesture control unit
Position 1 = On
LED bar lights up blue
One LED of the LED bar lights up
green
