MAINTENANCE AND INSPECTION
Regular checkups and preventive maintenance will ensure a more reliable and safe
operation. An initial inspection of the pump within 3 to 4 months after installation is
recommended. Subsequent inspections/maintenance can be carried out every 6
months
Always disconnect the pump from the power supply before inspecting the pump
Make sure that the pump cannot roll or fall over to injure people and damage
property
Rinse the pump thoroughly with clean water before working on the pump
The pump should not be activated if it is partially dismantled
Worn impellers often have very sharp edges. Be very careful when replacing them.
T H E N O N - C L O G G I N G S O L U T I O N
T M
13
