27
8.5.
Sensor menu
Submenu where the user can read and set the parameters that control the irradiance/temperature sensor.
With the button
you can switch from screen 1 to screen 2.
Screen 1:
➢
Temperature:
displays the collector temperatures in Celsius Degrees.
➢
Irradiance:
shows the UV-C irradiance read by the sensor placed at the edge of the collector.
The signal of the radiation can be displayed in % or in W/m2.
➢
Dose:
in case of panel connected to a flow signal, the system can also calculate UV dose
expressed in J/m2 UV dose.
➢
Sensor calibration:
if irradiance is displayed as % then it will be possible to calibrate the
sensor.
touching on
the user can open the pop-up calibration:
Touching on "CALIBRATE" the user confirms that the signal read by the sensor corresponds to
100% of the radiation of the lamps.
actual mV value reading
mV value stored
