7
Before fitting the Bath Cushion in the bath
•
Remove any non-slip mats from the area where the suction cups will be
positioned.
•
Ensure the bottom of the bath is clean and smooth, with no oil or bath
cleaner residues that will prevent the suction feet from sticking.
WARNING:
The suction cups may not adhere to the surface in baths that
have been re-enamelled or that have rippled or textured surfaces. Do not
use if the suction cups do not adhere to the bath.
Fitting the Bath Cushion in the bath
•
Inflate both sections of the Bath Cushion to
your desired firmness. Inflating the cushion
too little will not create the necessary space
between the base of the bath and your body.
•
Align the Bath Cushion along the centre-line
and to the rear of the bath. The join should
be close enough to the rear of the bath that
the backrest can easily touch the back slope
of the bath when open.
See Fig. 1
•
Firmly press down all four suction cups on
the base down and check that they are
securely stuck to the bath. Wet them lightly
to help them stick if necessary.
•
Fold the backrest out so that it rests on the
slope of the bath. Press in the middle of the
backrest so it conforms to the shape of your
bath, then press the suction cup on each tab
to secure the backrest in place.
ALWAYS FIT THE
BATH CUSHION
BEFORE FILLING
THE BATH.
Fig. 1
Summary of Contents for SS BATH 1
Page 1: ...INSTRUCTION MANUAL AND USER GUIDE Model SS BATH 1 ...
Page 14: ...14 ...
Page 16: ...16 ...
