Sistemes Electrònics Progrés s.a. AGRONIC 2500 Instruction Manual Download Page 1

Page: 1 / 40

INSTRUCTION MANUAL

BASIC MODEL

VERSION 2

INDEX

1. DESCRIPTION OF BASIC FUNCTIONS .................. 2

2. USER’S GUIDE ........................................................ 8

- Sections for the installer -

3. TECHNICAL FEATURES .......................................... 9

4. DIMENSIONS ........................................................ 10

5. INSTALLATION ...................................................... 10

5.1. EQUIPMENT PLACEMENT ............................. 10

5.2. CONNECTION LOCATIONS ........................... 11

5.3. CONNECTIONS .............................................. 11

5.3.1. Connecting the power supply .................. 12

5.3.2. Connecting the ground connection .......... 12

5.3.3. Connecting the digital sensors ................. 12

5.3.4. Connecting the outputs ............................ 12

5.4. INSTALLING THE OPTIONS ........................... 14

5.4.1. Diesel option............................................. 14

5.4.2. Double Voltage Option ............................. 15

5.4.3. Latch option.............................................. 16

5.4.4. Two Analog Sensor Option ...................... 17

5.4.5. Battery Charger Option ............................ 17

6. PARAMETERS ....................................................... 18

6.1. FERTILIZATION PARAMETERS ...................... 18

6.2. FILTER PARAMETERS .................................... 19

6.3. GENERAL PARAMETERS ............................... 19

6.4. PROGRAM PARAMETERS .............................. 21

6.5. SECTOR PARAMETERS ................................. 21

6.6. COMMUNICATION PARAMETERS ................. 22

6.7. VARIOUS PARAMETERS ................................ 22

6.8. INSTALLER PARAMETERS ............................. 22

6.9. DIESEL OPTION PARAMETERS ..................... 23

- Sections for the user -

7. PROGRAMS .......................................................... 24

7.1. SEQUENTIAL PROGRAMS ............................. 25

7.1.1. Alternating sequential programs .............. 26

7.2. FERTILIZATION .............................................. 27

8. MANUAL ................................................................ 28

9. READINGS ............................................................ 30

9.1. READINGS TOTALS ....................................... 30

9.2. READINGS ANOMALIES ................................ 30

10. CONSULTATION ................................................. 32

10.1. CONSULTATION - GENERAL ....................... 32

10.2. CONSULTATION - PROGRAMS ................... 33

10.3. CONSULTATION - SECTORS ....................... 34

10.4. CONSULTATION - FERTILIZERS .................. 35

10.5. CONSULTATION - FILTERS ......................... 35

10.6. CONSULTATION - COMMUNICATIONS ....... 35

10.7. CONSULTATION - AGRÓNIC ....................... 35

11. DIESEL OPTION ANNEX ..................................... 36

PRESENTATION

We wish to take this opportunity to thank you for the confidence in us which you have demonstrated in expressing interest

or acquiring the AGRÓNIC 2500.

This confidence, for our part, stimulates our efforts to meet and surpass the expectations of our clients to justify the tradi-

tional quality of our products.

This manual will explain the specification of the equipment as well as its installation and use.

However, if after reading this you still have any doubts, contact us and we will happily answer them.

Summary of Contents for AGRONIC 2500









































Search results

Summary of Contents for AGRONIC 2500

Reviews:

Related manuals for AGRONIC 2500

Brands by name

Popular brands

Sistemes Electrònics Progrés s.a. AGRONIC 2500, Instruction Manual

Search results

Summary of Contents for AGRONIC 2500

Reviews:

Related manuals for AGRONIC 2500

Brands by name

Popular brands