Flight Simulators Solutions
737
2.2
737NG CLOCK/CHRONO
User Manual
FS737NG-MAN-GAU-CT-E-18-0172
8 / 14
User Manual - 737NG Clock V3.5 - Rev2.2.docx
1.
The clock must be set to show the information (in the top display) corresponding to DATE UTC. To
do that correctly, press TIME/DATE until you can see that DAY, MO and YR are switched on and
TIME is switched off. UTC must also be switched on.
2.
Push at the same time the buttons RESET+CHR (first RESET and later CHR, otherwise we will
activate the Chronometer mode). This step is used for putting the clock in configuration mode.
Then, the hour digits will start to blink.
3.
Modify the DAY digits with the +/- push-buttons and stop when you have the correct day UTC.
4.
After that, push SET and the MONTH digits will start to blink.
5.
Make the same operation of to adjust the digits with the +/- push-buttons.
6.
After that, push SET and the YEAR digits will start to blink.
7.
Make the same operation of to adjust the digits with the +/-push-buttons.
8.
Once this operation is finished, return to push again SET and the information of the UTC DATE will
store in the system.
MAN TIME:
follow these steps to configure the UTC hour
1.
The clock must be set for showing the information (in the top display) corresponding to TIME MAN.
To do that correctly, press TIME/DATE until you can see that TIME is switched on and DAY, MO and
YR are switched off. MAN must also be switched on.
2.
Push the SET buttons. This step is used for putting the clock in configuration mode. Then, the hour
digits will start to blink.
3.
Modify the hour digits with the +/- push-buttons and stop when you have the correct hour MAN.
4.
After that, push SET and the minutes digits will start to blink.
5.
Make the same operation of to adjust the digits with the +/- push-buttons.
6.
Once this operation is finished, return to push again SET and the information of the MAN TIME will
store in the system.
