Siselectron SWE2520, User Manual, Page: 34 / 50

WPS (Wi-Fi Protected Setup)
The Wi-Fi Protected Setup (WPS) feature complies with the Wi-Fi
Alliance WPS standard and makes it easier to quickly add client
devices to an established, security-enabled Wi-Fi network.
WPS reduces the user steps required to configure a network and
supports two methods that are familiar to most consumers to
configure a network and enable security.
Note: Only applicable in Access Point and WDS AP
mode.
WPS (Wi-Fi Protected Setup)
WPS: Select to enable or disable the WPS feature.
WPS Current Status: Shows whether the WPS feature is
Configured or Unconfigured. When it is configured, the WPS has
been used to authorize a connection between the device and
wireless clients.
Self Pin Code: The PIN code for this device.
SSID: The SSID (wireless network name) used when connecting
using WPS.
Authentication Mode: Displays the encryption method used by
the WPS process.
Passphrase Key: This is the passphrase key that is randomly
generated during the WPS process. It is required if wireless clients
that do not support WPS attempt to connect to the wireless
network.
WPS via Push Button: Click the Start button to initialize the WPS
feature using the Push Button method.
WPS via PIN: Enter the PIN code for the wireless device and click
this button to initialize WPS feature using the PIN method.
Save: Click Save to confirm the changes.
32