Siselectron SWE2520, User Manual, Page: 12 / 50

Hardware Installation
2. Connect one end of the Category 5e Ethernet cable into the RJ-
45 port of the SWE 2520 and the other end to the RJ-45 port
of the computer. Ensure that the cable is securely connected
to both the SWE 2520 and the computer.
3. Connect the Power Adapter DC connector to the DC-IN port of
a) Ensure that the POWER light is on (it will be orange).
b) Ensure that the 2.4 GHz/5 GHz WLAN light is on (it will be blue for
2.4G, and green for 5G).
c) Ensure g that g the h LAN g (Computer g SWE 2520 g Connection)
light is on (it will be blue).
d) Once all three lights are on, proceed to set up the
Access Point using the computer.
This diagram depicts the hardware configuration
.
the SWE 2520 and the Power Adapter to an available electrical outlet.
Once both connections are secure, verify the following:
1. Ensure that the computer in use has an Ethernet Controller port
(RJ-45 Ethernet Port). For more information, verify with your
computer’s user manual.
10