Programing Menu is opened and
parameter is seen by pressing and buttons at same time. Switching between menu parameters is done by pressing button. W
ub-menu parameter is opened when pressing button.
In order to change sub-menu parameters value, press buttons while holding button down.When button is released , all changes will be saved to memory and related sub-menu parameter is returned.
Programming Menu is returned from sub-menu parameters by pressing buttons at same time. In the sub-menu ,
f no key is pressed for 10 seconds.
Conf
hile one of menu parameter is seen,
s
all changes will be saved to memory and Running Mode is returned from sub-menu
i
In programming menu , all changes can be saved to memory and Running Mode can be returned from programming menu either by pressing buttons at same time or
if no key is pressed for 10 seconds.
Programming Menu
TIME CONFIG MODE
Running Mode switches to Time Config Mode by pressing button. Display indicates configuration mode is opened
. Desired timer set value can be set by pressing buttons. After desired timer value set,
by flashing
new timer set value is saved to memory and Running Mode is returned either by pressing button or by waiting 10 seconds.
28
00
27
59
28
00
SET
Time unit ;
hour
(hour) or
min (
minute)
Audible Warning Config ;
8 different sound type
can be selected.
If
sd.
is 1,
audible warning is enabled.
Time config lower limit ;
can be selected between
0
:
01
and
t.uPL
parameter
value.
Time config upper limit ;
can be selected between
t.loL
parameter value
and 99:59.
Time config increase/decrease
step;
can be selected between
1
and 30.
Parameter security code ;
Parameter value must be
432.
(
message is seen and
factory reset is started
if holding button down for 4
seconds while
S.Cod
)
dPAr
is 0.
t.5Et
t.lol
t.upl
In.dE
p.5EC
5.Cod
a.
t.5.
a.
t.c.
HOUR
LED
:
Selected time unit is
HOUR.
OUT1 LED :
Specifies the output OUT1.
MIN LED :
Selected time unit is
MINUTE.
OUT2 LED
:
Specifies the output OUT2.
SET
Timer value can be set in Running Mode , Parameter values can be set in Programming Mode and newly assigned parameter values can be saved .
After parameter values are changed , new values are saved to memory and Running Mode is returned either by pressing button or by waiting 10
seconds.
arameter or time set value changing) .
Menu parameters can be accessed in Programming Mode. Parameter set values can be increased. Timer set value can be increased in Time Config
Mode. Timer set value increases gradually accelerated by pressing continuously.
Timer is started by pressing button for 1 second , when
Str.2
is selected (Except,either p
Timer and audible warning are stopped by pressing button for 1 second. when
Str.2
is selected (Except,either parameter or time set value changing) .
Menu parameters can be accessed in Programming mode. Parameter set values can be decreased. Timer set value can be decreased in Time Config
Mode. Timer set value decreases gradually accelerated by pressing continuously.
If
Str.t
is
Str.1
, digital inputs
(start,reset,gate) are enabled.
If
Str.2
,
START/STOP buttons are enabled.
Str.t
is
SET
SET
Output type ;
9 different output type
can be selected.
(
Out.1, Out.2, Out.3, ... , Out.9
)
Detailed in page 3/4.
t.SEt
security parameter ;
nonE:
Programming Menu
invisible.
P.YES
:
Menu
parameter can be changed.
P.no
:
Programming
Programming Menu
parameter can only be seen.
ConF
and
tSEt
security parameter ;
nonE:
Programming Menu
invisible.
P.YES
: Programming Menu
parameter can be changed.
P.no
: Programming Menu
parameter can only be seen.
In order to set related parameter to desired value , hold button down,
when display is started to flash use buttons.
Value increases/decreases gradually accelerated by pressing
buttons continuously.
time
SET
SET
SET
hour
min
Parameter Configuration Diagram
SET
Timer
set
value
28
00
Conf
tIME
5tr.t
0ut.t
5ond
hour
SET
SET
-
-
:
:
:
:
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
ETM232
ENDA
OUT1
H
M
SET
SET
ETM2432
ENDA
OUT1
OUT2
HOUR
MIN
START
STOP
DIGITAL TIMER
2
/4
ETM2432-
E
-0
1
-151012
SİSEL MÜHENDİSLİK ELEKTRONİK SAN. VE TİC. A.Ş.
Şerifali Mah.
Y.Dudullu 34775
ÜMRANİYE/İSTANBUL-TURKEY
Tel : +90 216 499 46 64 Pbx. Fax : +90 216 365 74 01
url : www.enda.com.tr
Barbaros Cad. No:18
ENDA
TM
