8 / 9
56. Headphones pot
Sets the volume of the headphones.
57. Headphone out
3. Software Display
The speed and also the beats can be precisely synchronized. If you had done this, it is possible to
fade between the decks back and forth. For visual inspection are both tracks presented in waveform.
The peaks represent the beats. The rectangles below show the position of the measurements in 4/4
stroke. The long rectangles mark the start of measurement. Two tracks are full synchronized if the
peaks an also the rectangles are at the same time.
1. To synchronize the tracks you should at first listen to them on headphone to verify.
2. Start the track and push then the SYNC button to the deck you want to fade.
3. To synchronize then, the long rectangles have to overlap. To do this use the jog wheel in
scratch mode. Press again the SYNC button again to make corrections.
4. You can also use the pitch functions with + and – to correct the speed.
