12
6. Table of commonly used Parameters:
Parameters Code
Actual
value
Display
value
Code
Definition of Parameter
Calibration
range
Unit
Press P Key
01 01 H Maximum sewing speed.
100-5000 spm
*100
02 02 SLM
Mode of slow start
A/T
---
03 03 CNR
Setting of counter ratio.
1-9
*1
05
05
V
End back-tacking speed.
200-3000 spm
*100
07 07 S Speed of slow start.
100-500 spm
*10
08 08 SLS
Stitch numbers of slow start.
1-9 stitches
*1
09 09 A Speed of automatic operation.
100-5000 spm
*100
40 40 WON
Selection of wiper function.
ON/OF
---
41 41 TM
Selection of trimmer sequence.
ON/OF
---
45 45 SP
Display of sewing speed.
0-8000 spm
*100
46 46 DIR
Rotation direction of motor.
CC/CW
---
Press P Key + Power ON
47 47 MAC
Machine Code.
---
---
60 60 L Minimum speed.
100-500 spm
*10
61 61 T Speed of thread-trimming.
100-500 spm
*10
64 64 FO
Setting of time of full output for foot-lifting
solenoid.
0-990 ms
*10
65 65 FC
Setting of time of duty cycle for foot-lifting
solenoid.
10-60%
*1
66 66 FD
Setting of delay time of motor operation.
0-990 ms
*10
70 70 HHC
Cancellation of function of raising
pressure foot lifter by half-heeling
backward.
ON/OF
---
75 75 SFM
Mode selection of safety switch
NC/NO
---
83 83 T2
Operating time of trimmer.
0-990 ms
*10
87 87 L2
Trimming running time selection.
0-1500 ms
*10
93 93 W2
Operating time of wiper.
0-3990 ms
*10
122 22. HL Upper limit of maximum speed.
100-5000 spm
*100
※
Displaying parameter number 00.=100, 0.0=200, 0.0.=300; for example: 06.=106 parameter.
※
The setting values may vary depending on the model.
