Siruba DL7300, Manual

Page: 56 / 58

29
●Error
code and parameter
List 1: Error code
Error
code
Meaning Possible problem
Er01
The error of needle
position
The motor hall is broken The hand
① ②
-wheel magnet fall
off The connecting of 9 needle signal line is not good
③
Er02
Can’t test the motor
signal
The connecting of 9 needle signal line is not good
①
The connecting of motor switch is not good.
②
Er03
The hall or phase of
motor is wrong.
The connecting of 9 ne
①
edle signal line is not good
The motor hall is broken.
②
Er04
The protection of
locked-rotor
The motor is overloading.
①
The connecting of motor
②
power line is not good.
Er05
The hardware is
over-current.
The motor is overloading.
①
The connecting of m
②
otor
signal line is not good.
Er07
The serial communic
ation is wrong.
The line connecting of control box is no good.
①
List 2: Parameter
No. Name
Parameter
range
Leave-f
actory
number
Function
P-01
The locked highest
speed
200~6500 4500
P-02
The setting of
motor positive and
negative rotate
0~1 1
0 means negative rotate, 1 means
positive rotate, the original is
positive notate.
P-03
The angle of down
stop
6~18 12 12 degree
P-04
The starting speed 200~800 250 250rpm
P-05
Accelerate the
speed
2000~4000 3500 3500rpm