Siruba DL7300, Manual

Page: 55 / 58

28
● Parameter adjusting and example
1.1
The panel is four ditigal nixietube display
Adjust the speed by press the and key when in standby interface
1.2
In standby interface ,press the key ,when the up needle position indicator light is on ,it
is on up needle stop , when the down needle position indicator light is on , it is on down position
stop, when the indicator light is off ,the needle position function turn off.
1.3
In standby interface , press the key , can turn on/off the machine head light.
1.4
Enter in and change the system parameter
：
When the power is on ,press the
①
key for some seconds ,then press the key ,
it enters into the parameter mode. The nixietube shows “
P-00
”
Press the
②
or key ,can change the parameter
After choose the parameter , press the
③
key ,enter into the parameter ,then can change
the value of the parameter by or key.
Press the
④
key save the value
1.4
The motor clockwise rotation and counter-clockwise rotation setting
：
When the power is on , press the “p” key for some second
①
s, then press the “+” key ,enter
into the parameter mode, the nixietube shows “
P-00
”
Press the
②
key ,change the parameter to “
P-02
”
Press the
③
key enter into the parameter, use the and to change the value.
0
means counter-clockwise rotation setting,
1
means clockwise rotation setting
④
Press the key save the value .