-29-
3-10-2
調整活動刀片彈簧壓力與刀片前後組
裝位置；襯套
e
上的螺絲
d
保持鬆開狀態，並
與
f
接觸平面的位置放入
2mm
厚的墊塊，接著
將
h
稍微上推
(
注意押腳不可隨著連動或位
移
)
，在調整刀片
c
時，應與固定刀槽孔邊緣應
保持約
0.05~0.1mm
之距離
(
避免活動刀
c
作動
時撞擊
)
，然後鎖緊螺絲
d (
圖二
)
。
3-10-2 How to adjust the pressure of moving
knife spring and the front -rear posi
ti
on of knife
blade. Loosen the screw “d” of knife guide collar
“e”. Then, please push the upper knife holder “h”
up and insert “a” 2mm pad between knife holder
guide collar “e” and knife holder shank support
“f” (Remark : The presser foot couldn’t be moved
when you push the knife holder “h”). The
clearance between the
fi
xed knife and moving
knife is 0.05mm ~ 0.1mm which to avoid the
moving knife hit the
fi
xed knife. Then,
tig
hten the
screw “d” (Fig 2).
