Sirona SIROLaser Xtend, Operating Instructions Manual

Page: 22 / 78

4 Installation
4.1 Scope of supply Sirona Dental Systems GmbH
Operating Instructions SIROLaser Xtend
22
63 18 351 D3576
D3576.201.01.05.02 11.2018
4 Installation
Any national or local regulations stipulating that the SIROLaser Xtend
may be installed only by trained personnel must be strictly observed.
4.1 Scope of supply
The following components are included in the scope of supply of the
SIROLaser Xtend:
Order-No
SIROLaser Xtend see below
1 x SIROLaser Xtend control unit including hand-
piece with integrated finger switch
1 x Starter kit fibers, 1 x 200 µm and 4 x 320 µm
1 x Fiber cutter
50 x Single-use tips including 1 x Bending tool
2 x Laser protective goggles for operator and assis-
tant
1 x Laser protective goggles for patients
1 x Switching power supply
1 x Transport packaging
Language-specific documentation set, e.g. User Manual
Country-specific power cable see „Spare
parts“
[→ 23]
SIROLaser Xtend Order-No for the following countries:
Order-No
Germany, Austria 63 13 733
Switzerland 63 13 774
Netherlands, Belgium 63 13 865
France 63 13 741
England 63 13 832
Denmark 63 13 857
Finland, Norway, Sweden 63 13 873
Italy 63 13 824
Spain 63 13 758
Portugal 63 13 840
Australia 63 13 790
Russia 63 13 808
Further countries on request.