62 07 687 D3530
D3530
.
201.01.06
.
02 07.2011
17
Sirona Dental Systems GmbH
4
Operation
Operating Instructions LEDview / LEDview S
4.1
Operation via the dentist or assistant element
båÖäáëÜ
4.1.2
SINIUS
SINIUS
Switching the operating light on/off on the dentist element
The operating light is always switched on at the set brightness level, see
"Adjusting the brightness" (below).
➢ Briefly press the
Operating Light fixed key.
If the operating light is switched on, the LED of the fixed key lights
up on the dentist and assistant elements.
Adjusting the brightness (LEDview)
The brightness of the operating light can be adjusted on the touchscreen
of the treatment center.
1. Press and hold the
Operating Light fixed key on the dentist element
(> 2 s).
The
Brightness settings screen is displayed on the touchscreen.
2. Use the – and + keys to adjust the brightness of the operating light.
Switching the dentist element composite function on/off
With the composite function, the operating light can be operated at a
reduced brightness of approx. 8,000 lux.
This function is required to prevent the premature curing of composite
fillings.
➢ Press the
Composite Function fixed key.
If the composite function is switched on, the LED of the
Composite function fixed key lights up on the dentist and
assistant elements.
Switching the composite function on the assistant element on/off
Press the
Operating light fixed key repeatedly to set the following
switching states on the assistant element:
1. Switched on: The operating light is switched on at the set brightness
level.
2. Composite function: The operating light is operated with reduced
brightness to prevent the premature curing of composite fillings.
3. Deactivated
➢ Press the
Operating light fixed key, repeat if necessary.
The examination light switches to “switched on”, “composite
function” or “switched off”. If the operating light is in use, the LED
on the fixed key lights up on the dentist and assistant elements.