65 45 177 D3492
D3492
.
201.09.01
.
02 05.2015
17
Sirona Dental Systems GmbH
5 System description
Operating Instructions CEREC Radio Device
5.4 Network unit
båÖäáëÜ
A schematic representation of a network unit is shown below.
As can be seen in the image, the network unit has four connection points:
● Antenna
The network unit has two antennas that are screwed on during
production. These antennas must not be removed or replaced with
different antennas.
● Micro-B USB
For power the network unit has a standard Micro-B USB port. A
standard 5V power adapter supplied in the package can be plugged
into this port. However, any standard USB 3.0 connection can be
used to power the network unit. The network unit integrated in the
CEREC mobile acquisition unit is powered through this port.
● RJ-45
The network unit has an RJ45 interface to which the standard
network cable (CAT5) can be connected. The network unit can be
connected to any other Ethernet communication device through this
interface. To establish a connection with the LAN infrastructure, you
can alternatively connect it to an Ethernet connection component
such as a hub or switch.
