63 98 536 D 3439
D 3439
.
201.06.10
.
02 10.2017
43
Dentsply Sirona
6 Operation
Operating Instructions CEREC MC XL Premium Package
6.3 Machining process
båÖäáëÜ
6.3.1.3
Permitted instrument combinations
Depending on the materials to be processed and the process type used,
various instrument combinations are permitted.
For an updated table of approved instrument combinations, please visit
the
"www.sirona.com"
. To access the online portal for technical
documentation, follow the
"SERVICE"
/
"Technical Documentation"
menu items in the navigation bar. The portal can also be accessed
directly via the following address
http://www.sirona.com/manuals.
Select your product there and then open the
"Bur table"
document.
6.3.2
Preparations
✔
Download or design a restoration (see operator's manual).
✔
When the milling option is activated, you can choose between the
grinding and milling manufacturing processes for plastic and
zirconium oxide materials in the material selection step.
✔
You are in the
"MANUFACTURE"
phase and have selected the
milling and grinding unit, checked the settings and positioned the
restoration in the block.
➢ Click the
"Start Milling"
step.
The milling and grinding unit moves into position to insert the set
screw.
6.3.3
Starting the machining processes
✔
The instrument sets are equipped with the required instrument
combinations for the machining process.
1. Depending on the configuration, you will be prompted to enter the
barcode (see also “Entering the bar code [ → 45]”).
2. Press the catch of the processing chamber door and open the door.
3. Place the selected block in the block fixing.
4. Clamp the block with the ball pressure screw. Use the block clamp
tool for this purpose (see also “Manual block clamp [ → 46]”).
5. Close the processing chamber door and confirm the process with
"Start"
on the PC or touch display.
In a PC notification window, the expected duration of the
machining process is displayed. During the machining process,
the patient name, restoration, PC username and expected
duration of the machining process are also displayed on the
touch display. The restoration is also represented from the
occlusal point of view and machining mode.
NOTICE
Error message during touch process!
Always be sure to insert the block that you selected for the restoration.
Otherwise an error message will be displayed during the touch process.
Summary of Contents for CEREC MC XL Premium Package
Page 77: ......
