13
11
MAINTENANCE SPARE
During servicing and maintenance your appliance may need some replacement parts. Here is a
short list of spare parts that are available. Please contact SIROCCO if other parts are required:
Eco 4 Only
Supplier Ref.
Description
Manufacturers Part No.
Coals Kit (Black)
1472-1
Pebbles Kit (Grey)
1473-1
Pebbles Kit (Sandstone)
1474-1
Pebbles Kit (Mixed)
1475-1
Front Ceramic (Black)
1466-1
Rear Ceramic (Black)
1467-1
Front Ceramic (Grey)
1468-1
Rear Ceramic (Grey)
1469-1
NG9079
Pilot Assy.
NG9079
OP VALVE 4701
Gas Valve
VAL-EC01-CV-OP-00A
CAT 82/380
Injector
1442-1
12
FAULT FINDING
FAULT
CAUSE / POSSIBLE REMEDY
Pilot will not light.
See Ignition Functional Check 1.
No spark.
See Ignition Functional Check 2.
Pilot will not stay lit or fire goes
out in use.
See Flame Failure Functional Check.
Uneven flame pattern e.g. flame
at one side only.
1. The fuel effect may need adjusting to even the flame pattern. See page
6.
Blue flames.
1. The fire will burn blue on initial lighting, until sufficient heat is generated
causing the flames to burn yellow. Typically 10 minutes.
2. Insufficient gas pressure. Check the supply pressure to the appliance.
3. The primary aeration may be obstructed by dirt, lint, etc. Clean and re-
check.
Fuel bed partially glowing at front.
1. Insufficient gas pressure. Check the supply pressure to the appliance.
2. The visual effect is controlled by the placement of the fuel effect pieces.
Try slight adjustments. See page 6.
Popping noises.
1. Some popping noises will always be present. Severe popping may be
caused by incorrect gas pressure. Check the supply pressure to the
appliance.
2. Try slight adjustments to the fuel effect pieces. See page 6.
V.11.07
