6
6. Setting a desired middle position (optional)
You can set a middle position of your choice as an option.
The middle position can only be set after the two end positions have been set.
Setting the desired middle position:
The middle position is now set. You can move your drive to this position by pressing and holding
the stop button.
Deleting the middle position:
The middle position is hereby deleted.
7. Reset to factory settings
Press and hold the learn button on the motor
head with an object until the drive reacts only
4 times with a short up/down movement.
Release the learn button again. The motor is
now set to the factory settings. All previous
connections and settings are deleted.
1. Move the drive to the
desired middle position.
Press the P2 button once.
The drive confirms with an
up/down movement.
2. Then press the stop
button once. The drive
confirms
with
an
up/down movement.
3. Press the stop button
again. The drive confirms
with
two
up/down
movements.
1. Move the drive to the
middle position. Press the
P2 button once. The drive
confirms with an up/down
movement.
2. Then press the stop
button once. The drive
confirms
with
an
up/down movement.
Ab-Bewegung.
3. Press the stop button
again. The drive confirms
with
one
up/down
movement.
