23
4
Peel the protective material from the adhesive strips (see Figure 9) and
press the Rubber Cover/Tail firmly into place on the vehicle .
5
Double check that the location of the antenna and Rubber Cover/Tail are
correct, and continue to press firmly down on the Rubber Cover/Tail for
another 30 seconds . At room temperature (68° F), maximum adhesion
usually occurs within 72 hours . During this period, avoid car washes and
other contact with the antenna and the Rubber Cover/Tail .
Cable Routing
After you have mounted the antenna you can route the antenna cable to the
Vehicle Dock . Separate antenna cable routing procedures are provided for each
type of vehicle: Sedan/Coupe, Pickup Truck, SUV/Mini-Van and Convertible .
Note that additional breakout illustrations for each step of the antenna cable
routing procedures can be found on the SiriusXM website at www .siriusxm .ca .
Click on the Install/Activate link and then follow the link for the Car Installation
Tips .
Summary of Contents for Stratus 7
