WARNING
Thank you for purchasing a Sirius Range Hood.
Please read all the instructions in this manual before in-
stalling the appliance.
Save these instructions for future reference.
Only use this appliance as an exhaust ventilation system for the removal of coo-
king vapors.
DO NOT
use to expel flammable substances or any other materials
or vapors.
The installation procedures in this manual are intended for qualified installers, ser-
vice technicians or persons with similar qualified background.
DO NOT
attempt to install this appliance yourself.
Ensure that electrical power is turned off at source before commencing installation.
All electrical wiring must be properly installed, insulated and grounded and conform
to all applicable codes and standards.
Make sure all existing duct work is clean of grease build up, or duct work should be
replaced, if necessary, to avoid the possibility of a grease fire. Check all joints on
ductwork to ensure proper connection and all joints should be properly taped. Be
careful when cutting through ceilings or walls not to damage any hidden pipes or
electrical wiring. Ensure your kitchen has sufficient air return vents to replace the
exhausted air.
The minimum distance between the cooker surface and the inferior part of the co-
oker hood must be of 650 mm.
Fan ducts should always be vented to the outside of your home and never into
spaces within walls, ceilings, lofts or attics. Only use rigid, smooth steel for ducting.
The exhaust point of the blower requires a 6” round connection.
4
Summary of Contents for SUF6
Page 2: ...2 1 5 3 2 6 4...
Page 3: ...3 7 11 8 10 12 9...
