Sirius Satellite Radio SU-DD2-L INOX, Installation, Use And Maintenance Instruction

Page: 10 / 20

MODEL SDD2-L GLASS VERSION
MODEL SDD2-L INOX VERSION
A: Light ON/OFF key
The light switches on and off only when the carria-
ge is fully OPEN.
Pressing this button with the carriage closed will
cause the carriage to open and then the light will
switch on .
The button also serves to switch off the light if it
is on.
B: ON/OFF key
This starts the extraction carriage upward move-
ment and when it is fully open, it sets the second
extraction speed.
With the carriage open: it switches off the mo- tor
and if on, the light; then it retracts the ex- traction
carriage.
C: (-) Key
This reduces the speed of the extractor motor from
the 4th speed until the motor switch- es off, without
closing the pull-out car- riage.
D: Indicators
• This signals the speed setting, by only the rele-
vant LED switching on.
• This signals that all filters have been saturated by
all LEDs switching on.
EN
HOW THE COOKER
HOOD WORKS
10 SUDD2L - SUDD3
E: (+) Key
This increases the speed of the extractor mo- tor,
from 1st to 4th speed, without moving the extractor
panel.
F: Timer
10 min after setting, it serves to stop the ex- tractor
motor, close the carriage and switch the lights off,
if they are on. The set function is signalled by the
flashing LEDs “D” for the set speed. The timer can
be cancelled by press- ing the key again.
MODEL SU-DD3 VERSION
OFF switch: (Fig. 16G) It is used to close the aspi-
ration panel completely or to position it at in-terme-
diate heights at least mm 180 above the cooktop.
While closing the aspiration panel keeps on wor-
king at the speed set up to the height of mm 180
from the cooktop. Below this height the aspiration
function is automatically cut out.
On : (Fig.16H) It is used to extract the
aspiration panel up to the maximum height of mm.
300 and to set automatically the first aspiration
speed when reaching the height of mm 180 from
the cooktop.
When pressing the button again after reaching this
height, the aspiration motor speed can be encre-
ased.
If the aspiration panel is positioned at an interme-
diate height between mm 180 and mm 300, the
aspiration panel can start raising again by pressing
first the OFF switch and then the On/+.
Switch.
Leds: (Fig. 16I) The different speed levels are in-
dicated leds.
MINUS SWITCH: (Dis. 16L) it is working only if the
position reached by the aspiration panel is higher
than mm 180 from the cooktop. It is used to decre-
ase the aspiration motor speed.
TIMER SWITCH: (Fig.16M) : it is used to stop au-
tomatically the aspiration system and to close au-
tomatically the aspiration panel ten minutes it has
been set.